Grease

Grease Manufacturer

Greases are a lubricant composed of a petroleum-derived or synthetic oil thickened with a soap or thickening agent to a solid or semi fluid consistency. Grease oil is widely used as a lubrication oil for rolling-element bearings, gears, and many other tribo-components.

Lubricating grease oil is usually formed out of the following components that help keep it in a semi-solid state:

Thickener – 5% to 20%
Base oil – 80% to 95%
Additives – 0% to 10%

All three of these ingredients in grease oil have different purposes. For instance, the thickeners are the lubricants reducing friction between moving surfaces. Thickeners in greases like soap hold oil in reserve until it’s needed to lubricate. So when they are exposed to movement such as vibrations or a change in temperature, they are triggered to release oil.

As for the additives, they work to complement the lubricating act of the base oil and enhance its abilities in protecting against wear and rust. It has a high viscosity already, but due to stress, its thickness levels reduce, and it gets oilier, nearly matching the thickness of its base ingredient. This entire process is known as thixotropy and is one of the primary characteristics of this lubricant; it also separates it from other seemingly similar substances like petroleum jellies.

Gandhar Oil, One of the Leading Brands Among Lubricants and Grease Manufacturers, Offers a Wide Range of Products in Greases

Gandhar Oil is considered among the best of the best when it comes to grease oil manufacturers and grease oil suppliers across the globe. Our wide and varied products in lubricating grease oils include:

Three Wheeler Grease

Anti-Seize Compound

Calcium Grease- Gel Type

Chassis Lubricating Grease Oil

Extreme Pressure Greases

Graphite Greases

Trailer Axle Greases

Hammer/ Chisel Lubricating Grease Oil

Sugar Mill Bearing Greases

Wire Rope Greases

Steel Mill Greases

Features of Greases

grease

Oil and grease are not the same; in fact, lubricating grease oils display a unique set of characteristics of their own which you must consider before picking a product for application, like vehicle greases, engine grease, or motor grease.

Here are some features of grease you need to be aware of:

  • Pumpability: this is the ability of lubricating grease oils to be pumped/pushed through a system.
  • Water resistance: this is the ability of greases to withstand the effects of water without any change in their lubricating abilities.
  • Consistency: the consistency of greases is their resistance to deformation by any applied force.
  • Dropping point: this is an indicator as to the heat resistance of greases.
  • Oxidation stability: this is the ability of lubricating grease oils to resist a chemical union with Oxygen.
  • Temperature effects: Higher temperatures affect greases more than oils; they cause greases to soften and bleed, and thus flow away from the required parts. On the other hand, if the temperature is too low, lubricating grease oils become viscous enough to be classified as hard grease.

Usage Of Grease

The many uses of lubricating grease oils include:

  • Greases provide protection against water ingress and rust.
  • Lubricating grease oils reduce friction experienced by machines.
  • Greases can act as a sealant; they are used in the automotive industry for tasks like chassis, wheel bearings, and gears.
  • Any machinery used in extreme conditions, like high temperatures, pressures, and shock loads require greases since they provide thicker film cushions than oils.
  • Grease films are thick enough to even allow for sound insulation.
Why Gandhar Oil is Known Worldwide as a Lubricating Grease Oil Manufacturing Company

Greases manufactured by the Gandhar Oil Refinery are meant for long-term lubrication; we are leagues ahead of contemporary grease oil suppliers when it comes to innovation, meeting customer demands, and abiding by international quality requirements. Our clients span continents, and that alone proves our excellence as a grease manufacturing company.

Grease Oil FAQs

Greases control friction and wear by creating a friction-reducing film between moving surfaces. This way, the bumps between the surfaces are smoothened, and friction is decreased.

Greases are usually oils with added thickeners. At room temperature, lubricating grease oils are usually solid, while general oils are usually liquid. Not all greases come from oils, even though all oils can be made into greases by adding thickeners.

Greases are generally used on machinery, tools, or other such equipment, while oils have many non-industrial uses as well.